Berkel 705 Wartungshandbuch PDF herunterladen (Seite 33)

4. Press out 2 idler shafts (3375-0669) using a 1/2″ arbor press. Exert steady, ﬁrm pressure until the shafts drop

through. Catch the shafts with your hand so they will not be damaged by dropping on a hard surface.

5. Press out the drive-gear assembly shaft (4375-0132) from the back side of the gear box (the side opposite

the housing), complete with gears, using a 5/8″ diameter arbor press.

NOTE

On occasion the back bearing will break loose and drop with the assembly into

the housing. In that case you will have to wait until the housing halves are sepa-

rated before the bearing is removed from the shaft.

S6151-DL-MMM-010

1-21

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 51 52

Keine Kommentare

Berkel 705 Wartungshandbuch Seite 33