Berkel 705 Wartungshandbuch PDF herunterladen (Seite 36)

Rotate the bearings with your ﬁngers. If there is an irregular rotation, if they are tight and binding or if they

have a granular feel, as if there is sand in the bearings - it probably indicates that the bearings have been dam-

aged in removal and must be replaced.

B. GEAR REPLACEMENT

• If either of the gear cluster assemblies (4575-0285 or 4575-0286) are to be replaced, you would order the

respective assembly.

• If gear drive assembly (4375-0132) must be replaced, the assembly will be shipped complete except for the

rear bearing. The rear bearing can be pressed off the assembly and reused if not damaged.

• If a gear in the clutch assembly - front - (4375-0134) must be replaced, it will be shipped as a complete assem-

bly except for the rear bearing which is re-useable.

• If a gear in the rear clutch assembly (4375-0135) must be replaced:

a. Press off gear cluster (4575-0293) and rear bearing at the same time. The gear cluster (4575-0293) can be

ordered as a separate part.

b. Be sure to keep washer (3275-0010) for use in reassembly.

c. The rest of the assembly (4375-0135) will come already assembled.

S6151-DL-MMM-010

1-24

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 51 52

Keine Kommentare

Berkel 705 Wartungshandbuch Seite 36